← BACK TO RESULTS
REFERENCE IMAGE
EMANON PART NO.
MS20426AD4-14
MS20426AD4-14 is a rivet in aluminum alloy 2117, anodize or oxide film finish, 1/8 diameter and Between 0.865 inches and 0.885 inches length.
Rivet
REFERENCE IMAGEReference image — representative of the type, not the exact part; verify dimensions per specification.
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER0.125 in (1/8)
LENGTH0.865–0.885 in
GRIP0.677 mils and 0.697 centimeters
HEAD & SHANK
HEADFlush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
HEAD DIAMETER0.221–0.229 in
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.124–0.128 in
MATERIAL & FINISH
MATERIALAluminum 2117
MATERIAL SPECQQ-A-430
FINISHAnodize or oxide film
FINISH SPECMIL-A-8625 or MIL-C-5541
MECHANICAL
SHEAR STRENGTH26,000 psi
STANDARDS & TRACEABILITY
NSN5320-00-117-6957
FLIS · NSN 5320-00-117-6957 · retrieved 2026-08-08
DOCUMENTS
✓Certificate of Conformance — included with every order
No drawing on file — request it
length: 7/8", diameter: 1/8", countersunk precision head, aluminum alloy, roughly 880 pieces per pound, MS20426 series rivet
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.