← BACK TO RESULTS
EMANON PART NO.
MS20426AD5-3
MS20426AD5-3 is a rivet in aluminum alloy 2117, anodize or chromate finish, 5/32 diameter and Between 0.178 inches and 0.198 inches length.
Rivet
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER0.156 in (5/32)
LENGTHBetween 0.178 inches and 0.198 inches
HEAD & SHANK
HEADFlush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
HEAD DIAMETER0.282–0.290 in
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.155–0.159 in
MATERIAL & FINISH
MATERIALAluminum alloy 2117
MATERIAL SPECQQ-A-430 — FED SPEC
FINISHAnodize or chromate
FINISH SPECMIL-A-8625 or MIL-C-5541
MECHANICAL
SHEAR STRENGTH26,000 psi
STANDARDS & TRACEABILITY
NSN5320-01-004-9573
FLIS · NSN 5320-01-004-9573 · retrieved 2026-08-08
DOCUMENTS
✓Certificate of Conformance & test reports available for most products (standard cert fees apply)
No drawing on file — request it
length: 3/16", diameter: 5/32", countersunk precision head, aluminum alloy, roughly 2,200 pieces per pound
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.