← BACK TO RESULTS
EMANON PART NO.
MS20426AD5-8
MS20426AD5-8 is a rivet in aluminum alloy 2117, anodize or oxide film finish, 5/32 diameter and Between 0.490 inches and 0.510 inches length.
Rivet
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER0.156 in (5/32)
LENGTHBetween 0.490 inches and 0.510 inches
GRIP0.256 mils and 0.276 centimeters
HEAD & SHANK
HEADFlush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
HEAD DIAMETER0.282–0.290 in
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.155–0.159 in
MATERIAL & FINISH
MATERIALAluminum alloy 2117
MATERIAL SPECQQ-A-430 — FED SPEC
FINISHAnodize or oxide film
FINISH SPECMIL-A-8625 or MIL-C-5541
MECHANICAL
SHEAR STRENGTH26,000 psi
STANDARDS & TRACEABILITY
NSN5320-00-117-6885
FLIS · NSN 5320-00-117-6885 · retrieved 2026-08-08
DOCUMENTS
✓Certificate of Conformance & test reports available for most products (standard cert fees apply)
No drawing on file — request it
length: 1/2", diameter: 5/32", countersunk precision head, aluminum alloy, roughly 940 pieces per pound, MS20426 series rivet
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.