← BACK TO RESULTS
REFERENCE IMAGE
EMANON PART NO.
MS20426AD6-16
MS20426AD6-16 is a rivet in aluminum alloy 2117, anodize or oxide film finish, 3/16 diameter and Between 0.990 inches and 1.010 inches length.
Rivet
REFERENCE IMAGEReference image — representative of the type, not the exact part; verify dimensions per specification.
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER0.188 in (3/16)
LENGTH0.990–1.010 in
GRIP0.709 mils and 0.729 centimeters
HEAD & SHANK
HEADFlush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
HEAD DIAMETER0.349–0.357 in
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.186–0.190 in
MATERIAL & FINISH
MATERIALAluminum 2117
MATERIAL SPECQQ-A-430
FINISHAnodize or oxide film
FINISH SPECMIL-A-8625 or MIL-C-5541
MECHANICAL
SHEAR STRENGTH26,000 psi
STANDARDS & TRACEABILITY
NSN5320-00-117-7511
FLIS · NSN 5320-00-117-7511 · retrieved 2026-08-09
DOCUMENTS
✓Certificate of Conformance — included with every order
No drawing on file — request it
length: 1", diameter: 3/16", countersunk precision head, aluminum alloy, roughly 340 pieces per pound, MS20426 series rivet
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.