← BACK TO RESULTS
REFERENCE IMAGE
EMANON PART NO.
MS20426AD8-7
MS20426AD8-7 is a rivet in aluminum alloy 2117 overall, anodize overall or oxide film overall finish, 1/4 diameter and 0.428 inches minimum and 0.448 inches maximum length.
Rivet
REFERENCE IMAGEReference image — representative of the type, not the exact part; verify dimensions per specification.
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER0.250 in (1/4)
LENGTH0.428–0.448 in
GRIP0.053 nom mils and 0.073 nom centimeters
HEAD & SHANK
HEADFlush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
HEAD DIAMETER0.472–0.480 in
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.249–0.253 in
MATERIAL & FINISH
MATERIALAluminum 2117
MATERIAL SPECQQ-A-430
FINISHAnodize or oxide film
FINISH SPECMIL-A-8625 or MIL-C-5541
MECHANICAL
SHEAR STRENGTH26,000 psi
STANDARDS & TRACEABILITY
NSN5320-00-117-6898
FLIS · NSN 5320-00-117-6898 · retrieved 2026-08-09
DOCUMENTS
✓Certificate of Conformance — included with every order
No drawing on file — request it
length: 7/16", diameter: 1/4", countersunk precision head, aluminum alloy, roughly 370 pieces per pound
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.