← BACK TO RESULTS
REFERENCE IMAGE
EMANON PART NO.
MS20426B3-5
MS20426B3-5 is a rivet in aluminum alloy 5056, anodize or oxide film finish, 3/32in diameter and Between 0.302 inches and 0.322 inches length.
Rivet
REFERENCE IMAGEReference image — representative of the type, not the exact part; verify dimensions per specification.
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER3/32in
LENGTH0.302–0.322 in
GRIP0.161 mils and 0.181 centimeters
HEAD & SHANK
HEADFlush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
HEAD DIAMETER0.175–0.183 in
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.093–0.097 in
MATERIAL & FINISH
MATERIALAluminum 5056
MATERIAL SPECQQ-A-430
FINISHAnodize or oxide film
FINISH SPECMIL-A-8625 or MIL-C-5541
MECHANICAL
SHEAR STRENGTH24,000 psi
STANDARDS & TRACEABILITY
NSN5320-00-165-8768
FLIS · NSN 5320-00-165-8768 · retrieved 2026-08-08
DOCUMENTS
✓Certificate of Conformance — included with every order
No drawing on file — request it
length: 5/16", diameter: 3/32", countersunk precision head, 5056-h32 aluminum alloy, roughly 4,100 pieces per pound, MS20426 series rivet
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.