← BACK TO RESULTS
REFERENCE IMAGE
EMANON PART NO.
MS20427F2-7
MS20427F2-7 is a rivet in steel comp 301 or steel comp 302 or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385, 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM diameter and 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM length.
Rivet · listed as MS20427F2-7 Rivet
REFERENCE IMAGEReference image — representative of the type, not the exact part; verify dimensions per specification.
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER0.061–0.065 in
LENGTH0.428–0.448 in
HEAD & SHANK
HEADC9 flush countersunk
HEAD DIAMETER0.1346 in MAXIMUM
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.061–0.065 in
MATERIAL & FINISH
MATERIALSteel 301/302/303/303se +17
MATERIAL SPEC66,COND A FED STD ALL MATERIAL RESPONSES
MECHANICAL
SHEAR STRENGTH65,000 psi
STANDARDS & TRACEABILITY
NSN5320-01-084-4805
GOVERNING STANDARDMS20427F2-7
FLIS · NSN 5320-01-084-4805 · retrieved 2026-08-09
DOCUMENTS
✓Certificate of Conformance — included with every order
No drawing on file — request it
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.