MS21209 inserts: how to specify screw-locking helical coils
MS21209 inserts are stainless steel, screw-locking thread inserts. They put a strong thread into a tapped hole, either because the base material is too soft to hold a reliable thread on its own, such as aluminum, or to repair a thread that has been damaged. MS21209 is the number almost everyone orders by. The current government specification is NASM21209, which replaced it, and DLA and the major distributors still catalog the parts under MS21209 numbers.
The insert is a coil of stainless wire that threads into a special oversized tapped hole, called an STI (screw thread insert) thread. MS21209 is a locking insert: one coil is shaped to grip the screw and resist loosening under vibration. Not every helical insert locks. The free-running, non-locking coils are a different series, MS21208, so a generic "helical insert" is not automatically an MS21209.
How the part number is built
- Thread form. C means coarse thread (UNC). F means fine thread (UNF).
- Size. Numbered sizes below #10 use two digits: 04 is #4, 06 is #6, 08 is #8. #10 is written as 1, not 10. Fractional sizes are in sixteenths: 4 is 1/4, 5 is 5/16, 6 is 3/8.
- Length. The length code is a multiple of the thread diameter, in tenths: 10 is 1 times the diameter (1D), 15 is 1.5D, 20 is 2D, 25 is 2.5D, 30 is 3D. A 1D insert for a 1/4 inch thread is nominally 1/4 inch long once installed. This is the installed design length, not the length of the loose coil in the bag, which is slightly longer.
- Finish suffix. L means dry film lubricant. P means cadmium plating. No suffix means plain passivated stainless.
Worked examples
| PART NUMBER | WHAT IT IS |
|---|---|
| MS21209C0415 | #4-40 coarse, 1.5D long, plain |
| MS21209F1-15L | #10-32 fine, 1.5D long, dry film lubricant |
| MS21209F4-20P | 1/4-28 fine, 2D long, cadmium plated |
| MS21209C0610L | #6-32 coarse, 1D long, dry film lubricant |
Watch the hyphen
The smaller sizes usually run together, as in C0415 or F0820P. The #10 and fractional sizes usually take a hyphen, as in F1-15 and F4-20. Customers order both ways and we match either, but be careful with #10: the size code is 1, so F1-15 is a #10 insert 1.5D long. There is no such thing as F10-15.
Match the insert to the screw
The insert thread must match the screw's pitch. A 1/4-28 cap screw needs an F4 insert. A C4 insert is 1/4-20 and will not take the screw. Longer inserts (2D, 2.5D) give more thread engagement in soft material. Shorter ones (1D, 1.5D) suit thin bosses and shallow holes. Tap drill and STI tap sizes come from the print and the insert manufacturer's data, not from the insert part number.
Emanon Aircraft Fasteners can identify the insert from a partial number or a description and quote price and lead time on any MS21209 size. Certificates of Conformance and full material reports are available for a fee. Request a quote and we will usually come back within about an hour during business hours.
