NAS1149 washers: specs, sizes and AN960 alternate part numbers
NAS1149 washers are among the most commonly specified flat washers in military and aerospace work. You will also run into washers called out as AN960. That series was cancelled in 2011 and replaced by NAS1149, and the two are generally considered interchangeable. The washers spread the load under a fastener head or nut and protect the material underneath.
How the part number is built
A NAS1149 number has five parts: the series, a material letter, a size code, a thickness code and a finish letter.
Example: NAS1149C0632R
- NAS1149: the washer series.
- C: material. C is corrosion resistant (300 series stainless) steel. F is carbon steel. D is 2024 aluminum. B is brass. E is A286 heat resisting steel. G is 4130 alloy steel.
- 06: size, the screw it fits, in sixteenths of an inch. 04 is 1/4, 05 is 5/16, 06 is 3/8, 08 is 1/2, 12 is 3/4, 16 is 1 inch. Numbered screw sizes #0 through #9 use N plus the number: N4 is #4, N6 is #6, N8 is #8 (NAS1149FN432P). #10 does not use N; it is 03, the same code as 3/16 (NAS1149F0332P).
- 32: thickness in thousandths of an inch. 16 is 0.016, 32 is 0.032, 63 is 0.063, 90 is 0.090.
- R: finish. R is passivated. P is cadmium plated. K is anodized. J is chemical film. B is black oxide. H is plain, no finish.
Two things catch people out. First, the letter B means brass in the material position and black oxide in the finish position, so NAS1149B0863H is a plain brass washer and NAS1149CN949B is a black oxide stainless one. Second, finish letters go with particular materials. In practice:
| MATERIAL | USUAL FINISH LETTERS |
|---|---|
| C (stainless) | R passivated, sometimes B black oxide |
| F (carbon steel), G (4130), E (A286) | P cadmium plated |
| D (aluminum) | K anodized or J chemical film, sometimes H plain |
| B (brass) | H plain |
A number like NAS1149D0632R is not a standard combination, so if a drawing shows one, check it.
Converting AN960 to NAS1149
AN960 did not code thickness by number. A plain AN960 number was the standard thickness and an L suffix meant the light (thin) version. The actual thicknesses depend on the size, so use the table rather than a rule of thumb. The table shows cadmium plated steel (AN960 with no material letter, which becomes NAS1149F). AN960C (stainless) converts the same way to NAS1149C with an R finish, and AN960D (aluminum) to NAS1149D with a J or K finish.
| AN960 | SCREW SIZE | THICKNESS | NAS1149 |
|---|---|---|---|
| AN960-4 | #4 | 0.032 | NAS1149FN432P |
| AN960-4L | #4 | 0.016 | NAS1149FN416P |
| AN960-6 | #6 | 0.032 | NAS1149FN632P |
| AN960-6L | #6 | 0.016 | NAS1149FN616P |
| AN960-8 | #8 | 0.032 | NAS1149FN832P |
| AN960-8L | #8 | 0.016 | NAS1149FN816P |
| AN960-10 | #10 | 0.063 | NAS1149F0363P |
| AN960-10L | #10 | 0.032 | NAS1149F0332P |
| AN960-416 | 1/4 | 0.063 | NAS1149F0463P |
| AN960-416L | 1/4 | 0.032 | NAS1149F0432P |
| AN960-516 | 5/16 | 0.063 | NAS1149F0563P |
| AN960-516L | 5/16 | 0.032 | NAS1149F0532P |
| AN960-616 | 3/8 | 0.063 | NAS1149F0663P |
| AN960-616L | 3/8 | 0.032 | NAS1149F0632P |
| AN960-716 | 7/16 | 0.063 | NAS1149F0763P |
| AN960-816 | 1/2 | 0.063 | NAS1149F0863P |
One small difference for the rare case where it matters: AN960 cadmium plating was QQ-P-416 Type II Class 3, and the NAS1149 P finish is Type II Class 2, which is a slightly thicker plate.
What we stock
Emanon stocks the common variations: stainless (C) washers with passivation, carbon steel (F) washers with cadmium plating, and less common ones such as A286 (E) washers. Combinations that are rarely used may not be on the shelf, but they can be made to order with some extra lead time and cost. We cross-reference AN960 and NAS1149 part numbers as part of every quote. Certificates of Conformance are available for a fee. Request a quote and we will usually come back within about an hour during business hours.
