QUOTE DESK OPEN· ~1 HR RESPONSES · 9–5 PTAOG / LINE DOWN? RUSH DESK 949-427-0632 →

NAS1351 and NAS1352: fine and coarse thread socket head cap screws

REQUEST A QUOTE

NAS1351 and NAS1352 are the socket head cap screws called out in many aerospace and military assemblies. They look like commercial socket screws, and in many cases they are similar, but they are more tightly controlled in specification, finish and tolerance. The two series use an identical part number structure. The only difference is the thread: NAS1351 is fine thread (UNRF) and NAS1352 is coarse thread (UNRC), both class 3A.

They are not interchangeable. A 1/4 inch NAS1351 is a 1/4-28 thread. A 1/4 inch NAS1352 is a 1/4-20 thread. The rest of the two part numbers can look identical.

How the part number is built

A NAS1351 or NAS1352 part number gives the series, material, diameter, length and finish, in that order.

  1. Series. NAS1351 for fine thread, NAS1352 for coarse thread.
  2. Material. A dash means alloy steel (180 ksi). C means corrosion resistant steel, 18-8 (300 series). N means A286 heat resisting steel. Alloy steel numbers keep the dash as a placeholder (NAS1351-4-16P). C and N numbers do not (NAS1351C4-16).
  3. Diameter. Numbered sizes below #10 carry a leading zero: 04 is #4, 06 is #6, 08 is #8. #10 is 3 with no leading zero. Fractional sizes are in sixteenths of an inch: 4 is 1/4, 5 is 5/16, 6 is 3/8, 8 is 1/2.
  4. Length. The last number is the length in sixteenths of an inch. 8 is 1/2 inch, 10 is 5/8, 16 is 1 inch, 24 is 1-1/2 inches, 32 is 2 inches.
  5. Finish. P means cadmium plated (QQ-P-416 Type II Class 2). No finish letter means black oxide on alloy steel, and passivated on C and N stainless parts.

You will also see other letters in customer part numbers. H after the diameter means a drilled head for safety wire (NAS1351-8H32P). LE, LL, LN and LB mean a self-locking element in the thread. These are not material or finish codes.

Worked examples

PART NUMBERWHAT IT IS
NAS1351C4-161/4-28 fine thread, 1 inch long, 18-8 stainless steel, passivated
NAS1352N4-101/4-20 coarse thread, 5/8 inch long, A286 high temperature stainless, passivated
NAS1351-8-32P1/2-20 fine thread, 2 inches long, alloy steel, cadmium plated
NAS1352-08-6P#8-32 coarse thread, 3/8 inch long, alloy steel, cadmium plated

Finishes in practice

Alloy steel parts are commonly stocked cadmium plated (P), though a number with no finish letter means black oxide. Stainless parts, C and N, are almost always passivated. Cadmium plating is permitted on stainless too, so NAS1351C4-8P is a real part number, but it is far less common.

Before you order

Check fine against coarse first. In general the smaller diameters and shorter lengths are more often fine thread, and coarse thread becomes more common as parts get larger and longer, but that is a tendency, not a rule. Sizes above 3/8 inch exist but are stocked far less often.

If you have a partial number or a description, Emanon Aircraft Fasteners can identify the screw and quote the correct NAS1351 or NAS1352 part, from stock or made to order. Certificates of Conformance and full material reports are available for a fee. Request a quote and we will usually come back within about an hour during business hours.

See also

REQUEST A QUOTEALL GUIDES