← BACK TO RESULTS
EMANON PART NO.
MS20426A3-4
MS20426A3-4 is a rivet in 1100 aluminum, anodize or chromate finish, 3/32 diameter and Between 0.240 inches and 0.260 inches length.
Rivet
SPECIFICATIONS
KEY DIMENSIONS
DIAMETER0.094 in (3/32)
LENGTHBetween 0.240 inches and 0.260 inches
GRIPMinimum 0.099 in; maximum 0.119 in
HEAD & SHANK
HEADFlush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
HEAD DIAMETER0.175–0.183 in
SHANK STYLED10 straight with radius chamfered tip
SHANK DIAMETER0.093–0.097 in
MATERIAL & FINISH
MATERIAL1100 aluminum
MATERIAL SPECQQ-A-430 — FED SPEC
FINISHAnodize or chromate
FINISH SPECMIL-A-8625 or MIL-C-5541
MECHANICAL
SHEAR STRENGTH26,000 psi
STANDARDS & TRACEABILITY
NSN5320-00-117-6938
FLIS · NSN 5320-00-117-6938, 5320-00-655-4757 · retrieved 2026-08-08
DOCUMENTS
✓Certificate of Conformance & test reports available for most products (standard cert fees apply)
No drawing on file — request it
length: 1/4", diameter: 3/32", countersunk precision head, soft aluminum, roughly 5000 pieces per pound, MS20426 series rivet
Emanon is a stocking distributor — quality-system certifications are held by the certified manufacturers we source from, not by Emanon. Every shipment carries manufacturer certifications and full lot traceability.